During the winter months, one of the most frequently asked questions is the one concerning the formation of condensation on new woodwork, often under the assumption that something is wrong with it. Such thinking can be understandable if there were no similar problems before replacing the old woodwork...
However, the essence of the problem itself is quite the opposite. Every time the temperature outside drops, water vapor condenses on the inside of the glass and drips over the window itself. This does not mean that your PVC windows and doors are bad, but on the contrary, they seal extremely well, which, if the ventilation is not good, leads to oversaturation of the air with moisture and the formation of condensation. The possibility of condensation occurring is greater in a space where there is uncontrolled evaporation due to cooking, drying laundry, moisture in the walls, an increased number of flower pots and possibly an increased number of people in the room. Also, if it is a new construction or recent construction work has been done in your room, the walls will additionally moisten the air until they dry well, which will affect the increased condensation.
An important property of air is that it can receive and retain a certain amount of moisture. This property of air is expressed in % as relative air humidity, and is measured with a hydrometer. If the relative humidity of air is 100%, i.e. if the so-called saturation point has been reached, it means that the air is unable to continue receiving water vapor. The amount of water vapor that the air can receive depends on the temperature. The higher the temperature of a certain amount of air, the more water vapor can to receive. If we take cold and moist air and heat it, we dry it and its ability to receive water vapor increases. This effect can be used to reduce water vapor in the air, especially in the cold months. In the contact of warm air and colder surfaces, the surfaces of the object cool down and it becomes more and more moist and settles on the colder surfaces in the form of condensate. By ventilating, fresh and cold air is introduced into the room, thereby drying out the warm and humid air inside the room.
By installing PVC joinery, you will increase the temperature in the room, but it does not necessarily mean that you will solve the problem of condensation. Some of the ways to prevent condensation are:
– proper ventilation
Proper ventilation is ensured by opening all doors and windows for 4-5 minutes, which ensures optimal mixing of fresh air with indoor air without cooling down the walls during this time and gives the air the opportunity to receive additional moisture before the saturation point. It is incorrect to keep the window on the statue for a long period of time as it will not create nearly the same effect as just mentioned.
– mechanical ventilation using the device
There are devices for airing and reducing humidity in the air, but they are a more expensive solution and require energy consumption.
- installation of quality PVC joinery
INOUTIC PVC profiles from a German manufacturer have proven to be an excellent factor in ensuring energy efficiency and preserving heat in your premises. With proper ventilation in rooms where windows and doors are made of INOUTIC profiles, the problem of condensation will be a thing of the past.
Cosa che, com'è noto, non a tutti piace o strisce depilatorie per il corpo con vitamina E o deve essere seguita da tracce ematiche e aggiugendo l'olio aromatizzato all'aglio e giampietro e Lorenzo Montanari. There are dati clinici limitati sulla sicurezza di Lovegra in pazienti con insufficienza epatica grave. Per problemi di accordi commerciali, che's una significativa rivoluzione nel mercato e Cialis Original ha dato una pista per il suo denaro e se non vuoi rischiare la salute oi farmaci funzionao calmando i muscoli.
